International Books & Journals Publisher
Menu
1(4), (2022):18-25. DOI: https://doi.org/10.46632/jdaai/1/4/3
Krishna Kumar TP, M. Ramachandran, Chinnasami Sivaji, Chandrasakar Raja
A small or micro enterprise is usually a one-person show. A partnership is held by a firm or corporation Even in small units, operations are mainly carried out by shareholders or Carried out by one of the directors. In practice, others are sleeping partners or directors, essentially helping out financing. A company is classified If the paid up capital is less than or equal to 20,000 Birr As micro. Similarly, a company has its paid-up capital when less than or equal to Birr 500,000 considered small. However, it is the size of jobs or number of employees in MSE Does not provides information about Key Differences between Small Business and Small Business are scale and size. A small business is a type of small a business employing less than 10 persons, small Businesses with up to 500 employees including Haksever has fewer than 500 employees Define and characterizes a small business with shows following characteristics Management is independent; usually the manager is also the owner. Working Stress Design Method Reinforced A concrete design method is used Concrete is elastic, whereas steel and concrete are elastic in nature, in which the relationship between loads and stresses is linear. Working pressure method (WSM) This traditional design is perfect.
Kaddani, Sami, Daniel Vanderpooten, Jean-Michel Vanpeperstraete, and Hassene Aissi. “Weighted sum model with partial preference information: Application to multi-objective optimization.” European Journal of Operational Research260, no. 2 (2017): 665-679.
Akojwar, Sudhir G., and Pravin R. Kshirsagar. “Performance evolution of optimization techniques for mathematical benchmark functions.” International Journal of Computers1 (2016).
Khan, Zuhaib Ashfaq, Hafiz Husnain Raza Sherazi, Mubashir Ali, Muhammad Ali Imran, Ikram Ur Rehman, and Prasun Chakrabarti. “Designing a wind energy harvester for connected vehicles in green cities.” Energies14, no. 17 (2021): 5408.
Naufal, Ammar, Amelia Kurniawati, and Muhammad Azani Hasibuan. “Decision support system of SMB telkom university roadshow location prioritization with weighted sum model method.” In 2016 2nd International Conference of Industrial, Mechanical, Electrical, and Chemical Engineering (ICIMECE), pp. 107-111. IEEE, 2016.
Kshirsagar, Pravin R., and Sudhir G. Akojwar. “Prediction of neurological disorders using optimized neural network.” In 2016 International Conference on Signal Processing, Communication, Power and Embedded System (SCOPES), pp. 1695-1699. IEEE, 2016.
Rathor, Ketan, Sushant Lenka, Kartik A. Pandya, B. S. Gokulakrishna, Susheel Sriram Ananthan, and Zoheib Tufail Khan. “A Detailed View on industrial Safety and Health Analytics using Machine Learning Hybrid Ensemble Techniques.” In 2022 International Conference on Edge Computing and Applications (ICECAA), pp. 1166-1169. IEEE, 2022.
Goh, Chon-Huat, Yung-Chin Alex Tung, and Chun-Hung Cheng. “A revised weighted sum decision model for robot selection.” Computers & Industrial Engineering30, no. 2 (1996): 193-199.
Dheenadhayalan, V., and R. Devianbarasi. “Financial health of cooperative sugar mills-a case study of NPKRR cooperative sugar mill ltd.” Indian Cooperative Review 46, no. 3 (2009): 192-197.
Rathor, Ketan, Keyur Patil, Mandiga Sahasra Sai Tarun, Shashwat Nikam, Devanshi Patel, and Sasanapuri Ranjit. “A Novel and Efficient Method to Detect the Face Coverings to Ensurethe Safety using Comparison Analysis.” In 2022 International Conference on Edge Computing and Applications (ICECAA), pp. 1664-1667. IEEE, 2022.
Jeong, Jihyeon, and Youngjin Park. “Arrangement of array microphones for hearing-aids based on delay-weight-sum beamforming methods.” In 2014 14th International Conference on Control, Automation and Systems (ICCAS 2014), pp. 1540-1542. IEEE, 2014.
Kshirsagar, Pravin, Akshay Pote, K. K. Paliwal, Vaibhav Hendre, Pranav Chippalkatti, and Nikhil Dhabekar. “A review on IOT based health care monitoring system.” ICCCE 2019(2020): 95-100.
Koundal, Deepika, and Bhisham Sharma. “Advanced neutrosophic set-based ultrasound image analysis.” In Neutrosophic set in medical image analysis, pp. 51-73. Academic Press, 2019.
Dheenadhayalan, V. “Mudra-A Tool for Uplifting Micro Enterprises in India.” International Journal in Management & Social Science4, no. 12 (2016): 235-246.
Esangbedo, Moses Olabhele, and Ada Che. “Grey weighted sum model for evaluating business environment in West Africa.” Mathematical Problems in Engineering2016 (2016).
Raju, Shathaboina, and K. Raji Reddy. “ISSUES AND CHALLENGES OF SEED INDUSTRY IN INDIA: A STUDY.” International Journal of Retailing & Rural Business Perspectives3, no. 2 (2014): 1008.
Manjunath, C. R., Ketan Rathor, Nandini Kulkarni, Prashant Pandurang Patil, Manoj S. Patil, and Jasdeep Singh. “Cloud Based DDOS Attack Detection Using Machine Learning Architectures: Understanding the Potential for Scientific Applications.” International Journal of Intelligent Systems and Applications in Engineering10, no. 2s (2022): 268-271.
Tornow, V., G. Orlandini, M. Traini, D. Drechsel, and H. Arenhövel. “A study of electronuclear sum rules in light and medium-weight nuclei.” Nuclear Physics A348, no. 2-3 (1980): 157-178.
Saravanan, Vimala, M. Ramachandran, and Manjula Selvam. “Interaction between Technical and Economic Benefits in Distributed Generation.” Electrical and Automation Engineering 1, no. 2 (2022): 83-91.
Chary, D. Thiruvengala, Shathaboina Raju, D. Ravinder, and K. Raji Reddy. “Factors influencing consumers to invest in Cryptocurrency: Implications for the Indian Society: An Explanatory Study.”
Kaushik, Priyanka. “Role and Application of Artificial Intelligence in Business Analytics: A Critical Evaluation.” International Journal for Global Academic & Scientific Research1, no. 3 (2022): 01-11.
Lorenzana, J., G. Seibold, and R. Coldea. “Sum rules and missing spectral weight in magnetic neutron scattering in the cuprates.” Physical Review B72, no. 22 (2005): 224511.
Koundal, D., B. Sharma, and E. Gandotra. “Spatial intuitionistic fuzzy set based image segmentation.” Imaging in Medicine9, no. 4 (2017): 95-101.
Johansson, Robert, Bo Leckner, Klas Andersson, and Filip Johnsson. “Account for variations in the H2O to CO2 molar ratio when modelling gaseous radiative heat transfer with the weighted-sum-of-grey-gases model.” Combustion and Flame158, no. 5 (2011): 893-901.
Kshirsagar, Pravin R., Anil N. Rakhonde, and Pranav Chippalkatti. “MRI image based brain tumor detection using machine learning.” Test Engineering and Management81 (2020): 3672-3680.
Dheenadhayalan, V. “Impact of E-Commerce on the Changes in Consumer’s Buying Behaviour in Malappuram District.” Annals of the Romanian Society for Cell Biology(2021): 3441-3452.
Mago, Beenu, Amira Abdullahi Aideed, Hassan Salim Al Ali, Sultan Saeed Alnuaimi, and Fahad Rashid Al Qahtani. “Ethical Decision Making in Soft lifting-A UAE Based Case Study.” International Journal for Global Academic & Scientific Research1, no. 2 (2022): 7-20.
Bharathi, Pon, M. Ramachandran, Vimala Saravanan, Soniya Sriram, and S. Sowmiya. “Investigating the Identification of Breast Cancer and Its Risk.” Pharmaceutical Sciences and Research 1, no. 1 (2022): 20-25.
RAJU, SHATHABOINA, and D. THIRUVENGALA CHARY. “The Influence of Covid-19 on Consumer Behavior in Telangana State Regarding Fast-Moving Consumer Goods (FMCG): A Study.”
Ren, Jian, Chun-hua Hu, Shao-qian Yu, and Peng-fei Cheng. “An extended EDAS method under four-branch fuzzy environments and its application in credit evaluation for micro and small entrepreneurs.” Soft Computing25, no. 4 (2021): 2777-2792.
Bhalla, Kanika, Deepika Koundal, Bhisham Sharma, Yu-Chen Hu, and Atef Zaguia. “A fuzzy convolutional neural network for enhancing multi-focus image fusion.” Journal of Visual Communication and Image Representation84 (2022): 103485.
Ahmad, Syed Zamberi. “Microfinance for women micro and small-scale entrepreneurs in Yemen: achievements and challenges.” International Journal of Entrepreneurship and Small Business16, no. 1 (2012): 102-120.
Mago, Beenu, Khalid Ishaq Almaazmi, Abdulla Jafar Almaazmi, Khalid Mohammed Falaha, and Eisa Dahi Almidfaa. “Modeling Situational IT Ethics in UAE.” International Journal for Global Academic & Scientific Research1, no. 2 (2022): 21-35.
Chaudhari, Rakesh N., Amit Kumar Jain, and Vivekanand K. Chatap. “An Overview on Phytochemistry, Pharmacology, and Traditional aspects of Muntingia calabura.” Research Journal of Pharmacy and Technology15, no. 6 (2022): 2814-2820.
Abrhám, Josef, Yuriy Bilan, Aliona Krauchenia, and Wadim Strielkowski. “Planning horizon in labour supply of Belarusian small entrepreneurs.” Economic research-Ekonomska istraživanja28, no. 1 (2015): 773-787.
Valecha, Niharika. “Transforming human resource management with HR analytics: A critical Analysis of Benefits and challenges.” International Journal for Global Academic & Scientific Research1, no. 2 (2022): 56-66.
Venkateswaran, C., D. R. Pallavi, M. Ramachandran, Vimala Saravanan, and Vidhya Prasanth. “A Review on Promethee and Analytic Hierarchy Process with Its Application.” Data Analytics and Artificial Intelligence 2, no. 1 (2022): 34-39.
Farooqui, Nafees Akhter, Amit Kumar Mishra, and Ritika Mehra. “Concatenated deep features with modified LSTM for enhanced crop disease classification.” International Journal of Intelligent Robotics and Applications(2022): 1-25.
Daskalakis, Nikolaos, Robin Jarvis, and Emmanouil Schizas. “Financing practices and preferences for micro and small firms.” Journal of Small Business and Enterprise Development(2013).
Dheenadhayalan, V., and R. Shanmuga Priya. “Influencing Factors on Purchase Decision of Women Two-Wheeler Users.” Annals of the Romanian Society for Cell Biology(2021): 3430-3440.
Bajaj, Karan, Bhisham Sharma, and Raman Singh. “Implementation analysis of IoT-based offloading frameworks on cloud/edge computing for sensor generated big data.” Complex & Intelligent Systems8, no. 5 (2022): 3641-3658.
Chiesi, Antonio M. “Measuring social capital and its effectiveness. The case of small entrepreneurs in Italy.” European Sociological Review23, no. 4 (2007): 437-453.
Mehra, Jihan, Kushank Khandelwal, Aditya Jain, Rushikesh Dandagwhal, and Rakesh Chaudhari. “FEA of Femur Bone Implant of Calcium, PEEK, Ti–6Al–4V Alloy and 316L Steel.” In Recent Trends in Materials, pp. 127-141. Springer, Singapore, 2022.
Valecha, Niharika. “A Study on Importance of Ethical Responsibilities in HR Management.” International Journal for Global Academic & Scientific Research1, no. 1 (2022).
Saravanan, Vimala, M. Ramachandran, and Malarvizhi Mani. “Selection of Photovoltaic Devices Using Weighted Sum Method.” Renewable and Nonrenewable Energy 1, no. 2 (2022): 67-73.
Hassan, Mohd Sayuti, and Kamarulazizi Ibrahim. “Sustaining small entrepreneurs through a microcredit program in Penang, Malaysia: a case study.” Journal of Human Behavior in the Social Environment25, no. 3 (2015): 182-191.
Chaudhari, Rakesh N., Amit Kumar Jain, and Vivekanand K. Chatap. “An Overview on Phyto-chemistry, Traditional and Pharmacological aspects of Pyrostegia Venusta.” Research Journal of Pharmacy and Technology15, no. 5 (2022): 2339-2345.
Garg, Hitendra, Bhisham Sharma, Shashi Shekhar, and Rohit Agarwal. “Spoofing detection system for e-health digital twin using EfficientNet Convolution Neural Network.” Multimedia Tools and Applications(2022): 1-16.
Mishra, Amit Kumar, and Shweta Paliwal. “Mitigating cyber threats through integration of feature selection and stacking ensemble learning: the LGBM and random forest intrusion detection perspective.” Cluster Computing(2022): 1-12.
Al-shami, Sayed Samer Ali, Mohd Razali Muhamad, Izaidin Majid, and Nurulizwa Rashid. “Women’s entrepreneurs’ micro and small business performance: insights from Malaysian microcredit.” International Journal of Entrepreneurship and Small Business38, no. 3 (2019): 312-338.
Farooqui, Nafees Akhter, Amit Kumar Mishra, and Ritika Mehra. “Automatic crop disease recognition by improved abnormality segmentation along with heuristic-based concatenated deep learning model.” Intelligent Decision TechnologiesPreprint: 1-23.
Rathore, Rachna. “A Review on Study of application of queueing models in Hospital sector.” International Journal for Global Academic & Scientific Research1, no. 2 (2022): 1-6.
Chandra, K. Ram, Eknath Tatte, M. Ramachandran, and Vimala Saravanan. “Understanding Blended Learning Advantages and Limitations.” Contemporaneity of Language and Literature in the Robotized Millennium 4, no. 1 (2022): 10-18.
Chaudhari, Rakesh Nimba, Amit Kumar Jain, and Vivekanand K. Chatap. “Investigation of antioxidant and antimicrobial activity of bark extract of Muntingia Calabura.”
Ndemo, Bitange, and Fides Wanjiku Maina. “Women entrepreneurs and strategic decision making.” Management Decision(2007).
Dheenadhayalan, V. “An Analysis of Financial Health of Select Indian Bulk Drugs and Formulations Companies* Mrs. R. Selvi.”
Kumar, Ashish, Ketan Rathor, Snehit Vaddi, Devanshi Patel, Preethi Vanjarapu, and Manichandra Maddi. “ECG Based Early Heart Attack Prediction Using Neural Networks.” In 2022 3rd International Conference on Electronics and Sustainable Communication Systems (ICESC), pp. 1080-1083. IEEE, 2022.
Bhunia, C. T., P. Chakrabarti, A. Chowdhuri, and T. Chandan. “Implementation of Automatic Variable Key with Choas Theory and Studied Thereof.” J IUP Computer Science5, no. 4 (2011): 22-32.
Baig, Saranjam, Mir Qasim, Li Xuemei, and Khalid Mehmood Alam. “Is the China-Pakistan economic corridor an opportunity or a threat for small and micro-entrepreneurs? Empirical evidence from Northern Pakistan.” Sustainability12, no. 5 (2020): 1727.
Tatte, Eknath, M. Ramachandran, and Vimala Saravanan. “Mobile Learning-A New Methodology in Education System.” Contemporaneity of Language and Literature in the Robotized Millennium 4, no. 1 (2022): 1-9.
Nautiyal, Aditi, and Amit Kumar Mishra. “Machine learning approach for intelligent prediction of petroleum upstream stuck pipe challenge in oil and gas industry.” Environment, Development and Sustainability(2022): 1-27.
Rathore, Rachna. “A Study on Application of Stochastic Queuing Models for Control of Congestion and Crowding.” International Journal for Global Academic & Scientific Research 1, no. 1 (2022).
Banana, K. R. I. S. H. N. A., and R. V. Chepuri. “Role of recovery channels in managing non-performing assets in scheduled commercial banks.” International Journal for Innovative Research in Multidisciplinary Field 2, no. 10 (2016): 355-359.
Chaurasia, Sandeep, and P. Chakrabarti. “An approach with Support Vector Machine using variable features selection on breast cancer prognosis.” International Journal of Advanced Research in Artificial Intelligence2, no. 9 (2013): 38-42.
Testa, Francesco, Natalia Marzia Gusmerottia, Filippo Corsini, Emilio Passetti, and Fabio Iraldo. “Factors affecting environmental management by small and micro firms: The importance of entrepreneurs’ attitudes and environmental investment.” Corporate Social Responsibility and Environmental Management23, no. 6 (2016): 373-385.
Krishna Kumar TP, M. Ramachandran, Chinnasami Sivaji, Chandrasakar Raja, ” Financing practices of Micro and Small Entrepreneurs using WSM MCDM Method”, REST Journal on Data Analytics and Artificial Intelligence, 1(4), (2022):18-25.