International Books & Journals Publisher
Menu
1(3), (2022):1-6. DOI: http://doi.org/10.46632/jame/1/3/1
Amol Lokhande, M. Ramachandran, Chinnasami Sivaji, Manjula Selvam
To study the effect of drilling variables working current, spindle speed, feed rate and drill size on drilling GFRP composites. Mach inability parameters include surface roughness, and delamination factor with drilling processes, which in structural applications may be the most limiting factor for composite materials. Drilling-induced damage in polymer-matrix composites (BMC). Engineering is an important field of research. To reduce damage caused by drilling various approaches have been tried around the world. In this study, an automated drilling operation was investigated. In PMCs and conventional materials Used for the dynamic phenomenon of drilling various mathematical modeling methods. Drilling of fiber-reinforced plastic composites Empirical techniques such as neural network/busy-logic and Transfer function can be modeled using modeling methods
Palanikumar, K., B. Latha, V. S. Senthilkumar, and J. Paulo Davim. “Analysis on drilling of glass fiber–reinforced polymer (GFRP) composites using grey relational analysis.” Materials and Manufacturing Processes 27, no. 3 (2012): 297-305.
Erturk, A. Tamer, Fahri Vatansever, Eser Yarar, E. Asım Guven, and Tamer Sinmazcelik. “Effects of cutting temperature and process optimization in drilling of GFRP composites.” Journal of Composite Materials 55, no. 2 (2021): 235-249.
Tagliaferri, V., G. Caprino, and A. Diterlizzi. “Effect of drilling parameters on the finish and mechanical properties of GFRP composites.” International Journal of Machine Tools and Manufacture 30, no. 1 (1990): 77-84.
Brinksmeier, E., S. Fangmann, and R. Rentsch. “Drilling of composites and resulting surface integrity.” CIRP annals 60, no. 1 (2011): 57-60.
Bhunia, C. T., P. Chakrabarti, A. Chowdhuri, and T. Chandan. “Implementation of Automatic Variable Key with Choas Theory and Studied Thereof.” J IUP Computer Science 5, no. 4 (2011): 22-32.
Palanikumar, K., S. Prakash, and K. Shanmugam. “Evaluation of delamination in drilling GFRP composites.” Materials and Manufacturing Processes 23, no. 8 (2008): 858-864.
Farooqui, Nafees Akhter, Amit Kumar Mishra, and Ritika Mehra. “Automatic crop disease recognition by improved abnormality segmentation along with heuristic-based concatenated deep learning model.” Intelligent Decision Technologies Preprint: 1-23.
Jia, Zhenyuan, Rao Fu, Bin Niu, Baowei Qian, Yu Bai, and Fuji Wang. “Novel drill structure for damage reduction in drilling CFRP composites.” International Journal of Machine Tools and Manufacture 110 (2016): 55-65.
Shitharth, S., Pratiksha Meshram, Pravin R. Kshirsagar, Hariprasath Manoharan, Vineet Tirth, and Venkatesa Prabhu Sundramurthy. “Impact of Big Data Analysis on Nanosensors for Applied Sciences using Neural Networks.” Journal of Nanomaterials 2021 (2021).
Khashaba, U. A., M. A. Seif, and M. A. Elhamid. “Drilling analysis of chopped composites.” Composites Part A: Applied Science and Manufacturing 38, no. 1 (2007): 61-70.
Khan, Zuhaib Ashfaq, Hafiz Husnain Raza Sherazi, Mubashir Ali, Muhammad Ali Imran, Ikram Ur Rehman, and Prasun Chakrabarti. “Designing a wind energy harvester for connected vehicles in green cities.” Energies 14, no. 17 (2021): 5408.
Wang, Gong-Dong, and Stephen Kirwa Melly. “Three-dimensional finite element modeling of drilling CFRP composites using Abaqus/CAE: a review.” The International Journal of Advanced Manufacturing Technology 94, no. 1 (2018): 599-614.
Khashaba, U. A. “Drilling of polymer matrix composites: a review.” Journal of composite materials 47, no. 15 (2013): 1817-1832.
Mishra, Amit Kumar, and Shweta Paliwal. “Mitigating cyber threats through integration of feature selection and stacking ensemble learning: the LGBM and random forest intrusion detection perspective.” Cluster Computing (2022): 1-12.
Kshirsagar, Pravin, and Sudhir Akojwar. “Classification & detection of neurological disorders using ICA & AR as feature extractor.” Int. J. Ser. Eng. Sci. IJSES 1, no. 1 (2015).
Singh, Amrinder Pal, Manu Sharma, and Inderdeep Singh. “A review of modeling and control during drilling of fiber reinforced plastic composites.” Composites Part B: Engineering 47 (2013): 118-125.
RAJU, SHATHABOINA, and D. THIRUVENGALA CHARY. “The Influence of Covid-19 on Consumer Behavior in Telangana State Regarding Fast-Moving Consumer Goods (FMCG): A Study.”
Latha, B., and V. S. Senthilkumar. “Modeling and analysis of surface roughness parameters in drilling GFRP composites using fuzzy logic.” Materials and manufacturing processes 25, no. 8 (2010): 817-827.
Farooqui, Nafees Akhter, Amit Kumar Mishra, and Ritika Mehra. “Concatenated deep features with modified LSTM for enhanced crop disease classification.” International Journal of Intelligent Robotics and Applications (2022): 1-25.
Latha, B., and V. S. Senthilkumar. “Fuzzy rule based modeling of drilling parameters for delamination in drilling GFRP composites.” Journal of reinforced plastics and composites 28, no. 8 (2009): 951-964.
Sundaramurthy, Shanmugam, C. Saravanabhavan, and Pravin Kshirsagar. “Prediction and classification of rheumatoid arthritis using ensemble machine learning approaches.” In 2020 International Conference on Decision Aid Sciences and Application (DASA), pp. 17-21. IEEE, 2020.
Khashaba, U. A., I. A. El-Sonbaty, A. I. Selmy, and A. A. Megahed. “Machinability analysis in drilling woven GFR/epoxy composites: Part I–Effect of machining parameters.” Composites Part A: Applied Science and Manufacturing 41, no. 3 (2010): 391-400.
Rajamurugan, T. V., K. Shanmugam, and K. Palanikumar. “Analysis of delamination in drilling glass fiber reinforced polyester composites.” Materials & Design 45 (2013): 80-87.
Sinha, Ashish Kumar, Ananda Shankar Hati, Mohamed Benbouzid, and Prasun Chakrabarti. “ANN-based pattern recognition for induction motor broken rotor bar monitoring under supply frequency regulation.” Machines 9, no. 5 (2021): 87.
Khanna, Navneet, Franci Pusavec, Chetan Agrawal, and Grzegorz M. Krolczyk. “Measurement and evaluation of hole attributes for drilling CFRP composites using an indigenously developed cryogenic machining facility.” Measurement 154 (2020): 107504.
Kshirsagar, Pravin, and Dr Sudhir Akojwar. “Classification and Prediction of Epilepsy using FFBPNN with PSO.” In IEEE international conference on communication networks, vol. 17. 2015.
Chary, D. Thiruvengala, Shathaboina Raju, D. Ravinder, and K. Raji Reddy. “Factors influencing consumers to invest in Cryptocurrency: Implications for the Indian Society: An Explanatory Study.”
Singh, Ninni, Vinit Kumar Gunjan, Amit Kumar Mishra, Ram Krishn Mishra, and Nishad Nawaz. “SeisTutor: A Custom-Tailored Intelligent Tutoring System and Sustainable Education.” Sustainability 14, no. 7 (2022): 4167.
Babu, J., and Jose Philip. “Experimental studies on effect of process parameters on delamination in drilling GFRP composites using Taguchi method.” Procedia materials science 6 (2014): 1131-1142.
Kamali, Ali-Mohammad, Milad Kazemiha, Behnam Keshtkarhesamabadi, Mohsan Daneshvari, Asadollah Zarifkar, Prasun Chakrabarti, Babak Kateb, and Mohammad Nami. “Simultaneous transcranial and transcutaneous spinal direct current stimulation to enhance athletic performance outcome in experienced boxers.” Scientific Reports 11, no. 1 (2021): 1-10.
Khashaba, U. A. “Delamination in drilling GFR-thermoset composites.” In International conference on aerospace sciences and aviation technology, vol. 10, no. 10th International Conference On Aerospace Sciences & Aviation Technology, pp. 461-481. The Military Technical College, 2003.
Akojwar, Dr Sudhir, Pravin Kshirsagar, and Vijetalaxmi Pai. “Feature extraction of EEG signals using wavelet and principal component analysis.” In National Conference on Research Trends In Electronics, Computer Science & Information Technology and Doctoral Research Meet. 2014.
Arul, S., L. Vijayaraghavan, S. K. Malhotra, and R. Krishnamurthy. “Influence of tool material on dynamics of drilling of GFRP composites.” The International Journal of Advanced Manufacturing Technology 29, no. 7 (2006): 655-662.
Khan, Hera, Ayush Srivastav, and Amit Kumar Mishra. “Multiclass Intent Analysis: Beyond the Conventional Polarities.” ECS Transactions 107, no. 1 (2022): 7119.
Chaurasia, Sandeep, and P. Chakrabarti. “An approach with Support Vector Machine using variable features selection on breast cancer prognosis.” International Journal of Advanced Research in Artificial Intelligence 2, no. 9 (2013): 38-42.
Lazar, Mihai-Bogdan, and Paul Xirouchakis. “Experimental analysis of drilling fiber reinforced composites.” International Journal of Machine Tools and Manufacture 51, no. 12 (2011): 937-946.
Jain, Divya, Meenu Chopra, Mrs G. Shalini, Anita Venaik, K. Sharath Babu, and Shathaboina Raju. “PUBLICITY RIGHT AND RIGHT TO PRIVACY: AN INDIAN PERSPECTIVE.” 湖南大学学报 (自然科学版) 49, no. 06 (2022).
Xu, Jinyang, Xianghui Huang, Ming Chen, and J. Paulo Davim. “Drilling characteristics of carbon/epoxy and carbon/polyimide composites.” Materials and Manufacturing Processes 35, no. 15 (2020): 1732-1740.
Akojwar, Sudhir G., and Pravin R. Kshirsagar. “Performance evolution of optimization techniques for mathematical benchmark functions.” International Journal of Computers 1 (2016).
Khan, Hera, Ayush Srivastav, Amit Kumar Mishra, and Tien Anh Tran. “Machine learning methods for estimating permeability of a reservoir.” International Journal of System Assurance Engineering and Management (2022): 1-14.
Palanikumar, K., B. Latha, V. S. Senthilkumar, and J. Paulo Davim. “Analysis on drilling of glass fiber–reinforced polymer (GFRP) composites using grey relational analysis.” Materials and Manufacturing Processes 27, no. 3 (2012): 297-305.
Kishore, R. A., R. Tiwari, Akshay Dvivedi, and Inderdeep Singh. “Taguchi analysis of the residual tensile strength after drilling in glass fiber reinforced epoxy composites.” Materials & design 30, no. 6 (2009): 2186-2190.
Soni, Rajkumar, Prasun Chakrabarti, Zbigniew Leonowicz, Michał Jasiński, Krzysztof Wieczorek, and Vadim Bolshev. “Estimation of life cycle of distribution transformer in context to furan content formation, pollution index, and dielectric strength.” IEEE Access 9 (2021): 37456-37465.
Kshirsagar, Pravin R., Anil N. Rakhonde, and Pranav Chippalkatti. “MRI image based brain tumor detection using machine learning.” Test Engineering and Management 81 (2020): 3672-3680.
Kim, D., M. Ramulu, and X. Doan. “Influence of consolidation process on the drilling performance and machinability of PIXA-M and PEEK thermoplastic composites.” Journal of Thermoplastic Composite Materials 18, no. 3 (2005): 195-217.
Nautiyal, Aditi, and Amit Kumar Mishra. “Machine learning approach for intelligent prediction of petroleum upstream stuck pipe challenge in oil and gas industry.” Environment, Development and Sustainability (2022): 1-27.
Rajmohan, Thiagarajan, and Kayaroganam Palanikumar. “Application of the central composite design in optimization of machining parameters in drilling hybrid metal matrix composites.” Measurement 46, no. 4 (2013): 1470-1481.
Raju, Shathaboina, and Kinnera Venkateshwarlu. “AGRICULTURAL INSURANCE IN INDIA–ISSUES AND CHALLENGES.” (2015).
Malik, Khurshid, Faiz Ahmad, and Ebru Gunister. “Drilling performance of natural fiber reinforced polymer composites: a review.” Journal of Natural Fibers 19, no. 12 (2022): 4761-4779.
Kshirsagar, Pravin R., and Sudhir G. Akojwar. “Prediction of neurological disorders using optimized neural network.” In 2016 International Conference on Signal Processing, Communication, Power and Embedded System (SCOPES), pp. 1695-1699. IEEE, 2016.
Debnath, Kishore, Inderdeep Singh, and Akshay Dvivedi. “Drilling characteristics of sisal fiber-reinforced epoxy and polypropylene composites.” Materials and Manufacturing Processes 29, no. 11-12 (2014): 1401-1409.
Arya, Vishakha, Amit Kumar Mishra Mishra, and Alfonso González-Briones. “Analysis of sentiments on the onset of COVID-19 using machine learning techniques.” ADCAIJ: Advances in Distributed Computing and Artificial Intelligence Journal 11, no. 1 (2022): 45-63.
Chaurasia, Sandeep, Prasun Chakrabarti, and Neha Chourasia. “An application of classification techniques on breast cancer prognosis.” International Journal of Computer Applications 59, no. 3 (2012).
Turki, Yosra, Malek Habak, Raphaël Velasco, Zoheir Aboura, Kamel Khellil, and Pascal Vantomme. “Experimental investigation of drilling damage and stitching effects on the mechanical behavior of carbon/epoxy composites.” International Journal of Machine Tools and Manufacture 87 (2014): 61-72.
Amol Lokhande, M. Ramachandran, Chinnasami Sivaji, Manjula Selvam, “A Study on GFRP Drilling Composites Using SPSS Statistical Analysis”, REST Journal on Advances in Mechanical Engineering, 1(3), (2022):1-6.