International Books & Journals Publisher
Menu
1(3), (2022):16-21. DOI: http://doi.org/10.46632/jame/1/3/3
Shreya Mane
The past ten years have seen a lot of research on the issues of heat transfer and fluid flow in micro-channels. With an emphasis on upcoming research requirements, a critical analysis of the state of research as it stands is offered. Following a brief introduction, the study discusses six themes related to transport phenomena in micro-channels: condensation, cooling of electronics, single-phase gas flow, augmentation of single-phase liquid flow and flow boiling, and micro-scale heat exchangers. In this study, we investigate the three-dimensional heat transfer and water flow properties in a set of rectangular micro-channel heat sinks for advanced electronic systems. Over the past ten years, mini/micro channel type compact heat exchangers have received a lot of attention. The ability to make heat exchangers smaller, lighter, and cheaper than those in use now is the primary motivator. Additionally, emerging applications that call for the cooling of small things, such electronics and micro-electro-mechanical devices, need for heat exchangers with tiny channels. Theoretically, it is examined how a nanofluid moves and transfers heat through a horizontal micro channel while being affected by a magnetic field and an electric double layer (EDL). The flow problem for a micro channel with a large aspect ratio is handled as a two-dimensional nonlinear system. The magnetic field and EDL body force are taken into account while calculating momentum equation
B. Tuckermann, and R.F.W. Pease, High-performance Heat Sinking for VLSI, IEEE Electron. Dev.Lett.EDL-2, pp. 126-129 (1981).
Tuckerman DB, Pease RFW (1981) High-performance heat sinking for VLSI. IEEE Electron Devices Lett 2:126–129.
Kishimoto T, Ohsaki T (1986) VLSI packaging technique using liquid-cooled channels. IEEE Trans Compon Hybrids ManufTechnol 9:328–335.
Chein R, Chen Y (2005) Performance of thermoelectric cooler integrated with microchannel heat sinks. Int J Refrig 28:828–839.
Kovacs GTA (1998) Micromachined transducers sourcebook, McGraw-Hill, New York.
F. Peng, G.P. Peterson, and Wang, B.X., Heat transfer characteristics of water flowing through microchannels. Experimental Heat transfer 7, pp 265-283 (1994).
Peng, X.F., and Peterson, G.P., Forced convection Heat Transfer of single-phase binary mixture through microchannels. Experimental Thermal and fluid science 12 pp 98-104(1996).
Chuan, X.D. Wang, T.H. Wang, W.M. Yan, Fluid flow and heat transfer in microchannel heat sink based on porous fin design concept, Int. Commun. Heat Mass Tran. 65 (2015) 52–57.
Leng, X.D. Wang, T.H. Wang, An improved design of double-layered microchannel heat sink with truncated top channels, Appl. Therm. Eng. 79 (2015) 54–62.
X. Wang, X.F. Peng, Experimental Investigation on liquid forced convection heat transfer through microchannels, International Journal of Heat and Mass Transfer 37 (supple.1), pp 73-82(1994).
Wilding M. A. Shoffner, and L. J. Kircka., Manipulation and Flow of Biological Fluids in Straight channels micromachined in Silicon, Clin. Chem., vol. 40, pp. 43-47, (1994).
N. Jiang, Z.Y. Zhou, J. Yao, Y. Li, and X. Y. Ye, Micro-fluid Flow in Microchannel, In proc. Transdueers 95, Stockholm, Sweden, June 25-29, pp. 317-320, (1995).
C.Y. Koh, R. Colony, Heat transfer of microstructures for integrated circuits, Int. Commun. Heat Mass Transfer 13 (1986) 898-98.
J. Kim, D. Kim, Forced convection in Proceedings of the 5th IASME/WSEAS Int. Conference on Heat Transfer, Thermal Engineering and Environment, Athens, Greece, August 25-27, 2007 102 7 microstructures for electronic equipment cooling, ASME J. Heat Transfer 121 (1999) 635-645.
J. Kim, D. Kim, D. Y. Lee, on the local thermal equilibrium in microchannel heat sinks, Int. J. Heat Mass Transfer 43 (2000) 1735-1748.
R. Safaei, M. Gooarzi, O.A. Akbari, M.S. Shadloo, M. Dahari, Performance evaluation of nanofluids in an inclined ribbed microchannel for electronic cooling applications. Electronics Cooling, (2016), DOI: 10.5772/62898.
A. Arani, O. A. Akbari, M. R. Safaei, A. Marzban, A.A.A.A. Alrashed, Heat transfer improvement of water/single-wall carbon nanotubes (SWCNT) nanofluid in a novel design of a truncated double-layered microchannel heat sink. International Journal of Heat and Mass Transfer, 113, (2017) 780-795.
Kandlikar, S. G., 2012, “History, Advances, and Challenges in Liquid Flow and Flow Boiling Heat Transfer in Microchannels: A Critical Review,” ASME J. Heat Transfer, 134, p. 034001.
Kosar, A., Kuo C.-J., and Peles, Y., 2006, “Suppression of Boiling Flow Oscillations in Parallel Microchannels with Inlet Restrictors,” ASME J. Heat Transfer, 128(3), pp. 251–260.
Bergles, A. E., and Kandlikar, S. G., 2005, “On the Nature of Critical Heat Flux in Microchannels,” ASME J. Heat Transfer, 127, pp. 101–107.
Peles, Y., 2012, Contemporary Perspectives on Flow Instabilities in Micro-channels, Begell House Inc., Redding, CT.
Oktay, S., and Kammerer, H. C., 1982, “A Conduction Cooled Module for High Performance LSI Devices,” IBM J. Res. Dev., 26(1), pp. 55–56.
Topol, A. W., La Tulipe, D. C., Shi, L., Alam, S. M., Frank, D. J., Steen, S. E., Vichiconti, J., Posillico, D., Cobb, M., Medd, S., Patel, J., Goma, S., DiMilia, D., Robson, M. T., Duch, E., Farinelli, M., Wang, C., Conti, R. A., Canaperi, D. M., Deligianni, L., Kumar, A., Kwietniak, K. T., D’Emic, C., Ott, J., Young, A. M., Guarini, K. W., and Ieong, M., 2005, “Enabling SOI-Based Assembly Technology for Three-Dimensional (3D) Integrated Circuits (ICs)” IEEE Electron Devices Meeting, TECHNICAL DIGEST Book Series, pp. 363–366.
Herwig, H., 2006, “Micro Process Engineering: Fundamentals, Devices, Fabrication and Applications,” Kockmann, N., ed., Advanced Micro and Nano Systems, Vol. 5, Wiley-VCH, Weinheim, Germany, Momentum and Heat Transfer in Micro Devices, pp. 47–70.
Kandlikar, S. G., and Grande, W. J., 2003, “Evolution of Microchannel Flow Passages—Thermohydraulic Performance and Fabrication Technology,” Heat Transfer Eng., 24(1), pp. 3–17.
Celata, G. P., 2004, Heat Transfer and Fluid Flow in Microchannels, Begell House, New York.
Kandlikar, S. G., Schmitt, D., Carrano, A. L., and Taylor, J. B., 2005, “Characterization of Surface Roughness Effects on Pressure Drop in SinglePhase flow in Minichannels,” Phys. Fluids, 17, p. 100606.
Hessel, V.; Hardt, S.; Yoshida, J. I., 2010, Micro Process Engineering, WileyVCH, Weinheim, Germany.
F. Peng, G.P. Peterson, and Wang, B.X., Heat transfer characteristics of water flowing through microchannels. Experimental Heat transfer 7, pp 265-283 (1994).
Shreya Mane, “Theoretical Aspects on Heat Transfer and Fluid Flow in Micro Channels”, REST Journal on Advances in Mechanical Engineering, 1(3), (2022):16-21.