1(2), (2022):19-27 DOI: https://doi.org/10.46632/jame/1/2/3
Dhiraj V. Astonkar, M. Ramachandran, Prabakaran Nanjundan, Malarvizhi Mani
Blind Spot in Heavy Vehicles Road safety is a major concern due to the increasing number of accidents every year Is. Braking from simple installation such as seat belt, airbag and rear camera on the safety system Very complex and intelligent like assist, lane change assistance and blind spot tracking The system includes up. Such as heavy trucks and cyclists or pedestrian’s Smart vehicle blind spot detection system conflicts between vulnerable road users Often causing serious injuries to vulnerable road users. Blind spot Mirrors and an advanced blind spot detection system help to avoid conflictsRoad protection is a major difficulty due to the increasing wide variety of accidents every 12 months Is. Braking from simple set up which include seat belt, airbag and rear digital camera at the safety device Very complex and intelligent like assist, lane trade help and blind spot tracking The system includes up. Such as heavy vehicles and cyclists or pedestrians’ Smart automobile blind spot detection device conflicts between prone road customers often inflicting serious accidents to susceptible road users. Blind spot Mirrors and an advanced blind spot detection system assist to avoid conflicts.In this paper we used TOPSIS for ranking the TOPSIS method is the most ideal solution Short-distance and Alternative The solution with the longest distance from the solution Determines, but the comparison of these distances Does not consider importance. Radar Model Example, Azimuth, Elevation, Horizontal resolution, Maximum detectable speed, Speed measurement accuracy. Evaluation Parameters in Radar type, Short Range, Radar Mid-Range, Radar Long Range. Use Attention deficit from the result it is seen that Maximum detectable speed is got the first rank whereas is the Speed measurement accuracy is having the Lowest rank.
Pitchipoo, P., D. S. Vincent, N. Rajini, and S. Rajakarunakaran. “COPRAS decision model to optimize blind spot in heavy vehicles: A comparative perspective.” Procedia Engineering97 (2014): 1049-1059.
Pyykonen, Pasy, Ari Virtanen, and Arto Kyytinen. “Developing intelligent blind spot detection system for heavy goods vehicles.” In 2015 IEEE International Conference on Intelligent Computer Communication and Processing (ICCP), pp. 293-298. IEEE, 2015.
Nomani, M. Z. M., and Madiha Tahreem. “Constitutionality and legality of corona virus (COVID-19) in India: limits of sanction and extent of liberation.” International journal on emerging technologies 11, no. 3 (2020): 14-18.
Vincent, D. S., P. Pitchipoo, and S. Rajakarunakaran. “Hybrid optimisation model for blind spot reduction in heavy vehicles.” International Journal of Computer Aided Engineering and Technology9, no. 2 (2017): 145-153.
Ehlgen, Tobias, Tomas Pajdla, and Dieter Ammon. “Eliminating blind spots for assisted driving.” IEEE Transactions on Intelligent Transportation Systems9, no. 4 (2008): 657-665.
Chen, C. T., and Y. S. Chen. “Real-time approaching vehicle detection in blind-spot area.” In 2009 12th international IEEE conference on intelligent transportation systems, pp. 1-6. IEEE, 2009.
Yogeesh, N. “Mathematical approach to representation of locations using k-means clustering algorithm.” International Journal of Mathematics And its Applications 9, no. 1 (2021): 127-136.
Nomani, M. Z. M., and Faisal Sherwani. “Legal control of COVID-19 pandemic & national lockdown in India.” Journal of Cardiovascular Disease Research 11, no. 4 (2020): 32-35.
Akojwar, Sudhir G., and Pravin R. Kshirsagar. “Performance evolution of optimization techniques for mathematical benchmark functions.” International Journal of Computers 1 (2016).
Beresnev, P. O., A. V. Tumasov, D. V. Zeziulin, D. M. Porubov, and L. N. Orlov. “Development of a detection road users system in vehicle A-pillar blind spots.” In IOP Conference Series: Materials Science and Engineering, vol. 386, no. 1, p. 012008. IOP Publishing, 2018.
William, P., N. Yogeesh, S. Vimala, and Pratik Gite. “Blockchain Technology for Data Privacy using Contract Mechanism for 5G Networks.” In 2022 3rd International Conference on Intelligent Engineering and Management (ICIEM), pp. 461-465. IEEE, 2022.
Beresnev, P. O., A. V. Tumasov, D. V. Zeziulin, D. M. Porubov, and L. N. Orlov. “Development of a detection road users system in vehicle A-pillar blind spots.” In IOP Conference Series: Materials Science and Engineering, vol. 386, no. 1, p. 012008. IOP Publishing, 2018.
Vincent, D. S., P. Pitchipoo, N. Rajini, and S. Rajakarunakaran. “Reduction of blind spots in heavy transport vehicles through the optimisation of driver seat design.” International Journal of Computer Aided Engineering and Technology10, no. 1-2 (2018): 3-14.
Bertozzi, Massimo, Alberto Broggi, Paolo Medici, Pier Paolo Porta, and Agneta Sjogren. “Stereo vision-based start-inhibit for heavy goods vehicles.” In 2006 IEEE Intelligent Vehicles Symposium, pp. 350-355. IEEE, 2006.
Kiang, Tsz Laam. “A Novel Multi-Sensor Crash Safety System Targeting Heavy Duty Vehicle Blind Spots.” In 2021 IEEE Asia-Pacific Conference on Image Processing, Electronics and Computers (IPEC), pp. 852-859. IEEE, 2021.
Obeidat, Mohammed Said, Nadah Faris Altheeb, Amer Momani, and Nader Al Theeb. “Analyzing the invisibility angles formed by vehicle blind spots to increase driver’s field of view and traffic safety.” International journal of occupational safety and ergonomics28, no. 1 (2022): 129-138.
Summerskill, Stephen, Russell Marshall, Sharon Cook, James Lenard, and John Richardson. “The use of volumetric projections in Digital Human Modelling software for the identification of large goods vehicle blind spots.” Applied ergonomics53 (2016): 267-280.
Paliwal, Priyanka, Julian L. Webber, Abolfazl Mehbodniya, Mohd Anul Haq, Anil Kumar, and Prem Kumar Chaurasiya. “Multi-agent-based approach for generation expansion planning in isolated micro-grid with renewable energy sources and battery storage.” The Journal of Supercomputing 78, no. 17 (2022): 18497-18523
Kshirsagar, Pravin R., and Sudhir G. Akojwar. “Prediction of neurological disorders using optimized neural network.” In 2016 International Conference on Signal Processing, Communication, Power and Embedded System (SCOPES), pp. 1695-1699. IEEE, 2016.
Nomani, M. Z. M., and Zafar Hussain. “Innovation technology in health care management in the context of Indian environmental planning and sustainable development.” International journal on emerging technologies 11, no. 2 (2020): 560-564.
Shukla, H. S., Narendra Kumar, and R. P. Tripathi. “Median filter based wavelet transform for multilevel noise.” International Journal of Computer Applications 107, no. 14 (2014).
Kumar Pandey, Rakesh, Shrey Aggarwal, Griesha Nath, Anil Kumar, and Behzad Vaferi. “Metaheuristic algorithm integrated neural networks for well-test analyses of petroleum reservoirs.” Scientific Reports 12, no. 1 (2022): 1-16.
Sekar, K. R., Mohd AnulHaq, Anil Kumar, R. Shalini, and S. Poojalaxmi. “An improved ranking methodology for malignant carcinoma in multicriterian decision making using hesitant VIKOR fuzzy.” Theoretical Computer Science 929 (2022): 81-94.
Nomani, Md Zafar Mahfooz, and Mohammad Rauf. “Legal policy for bio prospecting of natural resources in India.” Indian Journal of Environmental Protection 39, no. 11 (2019): 1009-1015.
Akojwar, Dr Sudhir, Pravin Kshirsagar, and Vijetalaxmi Pai. “Feature extraction of EEG signals using wavelet and principal component analysis.” In National Conference on Research Trends In Electronics, Computer Science & Information Technology and Doctoral Research Meet. 2014.
Kshirsagar, Pravin, and Dr Sudhir Akojwar. “Classification and Prediction of Epilepsy using FFBPNN with PSO.” In IEEE international conference on communication networks, vol. 17. 2015.
Barry, John, and Joseph Walsh. “A review of multi-sensor fusion system for large heavy vehicles off road in industrial environments.” In 2020 31st Irish Signals and Systems Conference (ISSC), pp. 1-6. IEEE, 2020.
Cheng, Yuk Ki, Koon Hung Wong, Chi Hang Tao, Cheok Ning Tam, Yiu Yan Tam, and Cheuk Nam Tsang. “Front blind spot crashes in Hong Kong.” Forensic science international266 (2016): 102-108.
Pitchipoo, P., D. S. Vincent, N. Rajini, and S. Rajakarunakaran. “COPRAS decision model to optimize blind spot in heavy vehicles: A comparative perspective.” Procedia Engineering97 (2014): 1049-1059.
Sundfør, Hanne Beate, Fridulv Sagberg, and Alena Høye. “Inattention and distraction in fatal road crashes–Results from in-depth crash investigations in Norway.” Accident Analysis & Prevention125 (2019): 152-157.
Raj, Shweta, R. Ezhilarasie, and A. Umamakeswari. “Zigbee-based collision avoidance system in blind spot and heavy traffic using ultrasonic sensor.” Indian Journal of Science and Technology9, no. 48 (2016): 1-5.
Wang, Ming-Hang, and Chien-Hung Wei. “Potential safety benefit of the blind spot detection system for large trucks on the vulnerable road users in Taiwan.” In MATEC Web of Conferences, vol. 81, p. 02007. EDP Sciences, 2016.
Ehrler, Verena, and Axel Wolfermann. “Traffic at intermodal logistic hubs: shedding light on the blind spot.” Transportation research record2288, no. 1 (2012): 1-8.
Singh, Sanjeev, Rufeng Meng, Srihari Nelakuditi, Yan Tong, and Song Wang. “SideEye: Mobile assistant for blind spot monitoring.” In 2014 international conference on computing, networking and communications (ICNC), pp. 408-412. IEEE, 2014.
Kumar, Anil, Saleh A. Alghamdi, Abolfazl Mehbodniya, Julian L. Webber, and Shavkatov Navruzbek Shavkatovich. “Smart power consumption management and alert system using IoT on big data.” Sustainable Energy Technologies and Assessments 53 (2022): 102555.
Revathy, G., Saleh A. Alghamdi, Sultan M. Alahmari, Saud R. Yonbawi, Anil Kumar, and Mohd Anul Haq. “Sentiment analysis using machine learning: Progress in the machine intelligence for data science.” Sustainable Energy Technologies and Assessments 53 (2022): 102557.
Park, Ro Hun. “Re-envisioning the Parable of the Rich Fool in Luke 12: 13-21 Beyond “Self”“and “Other”.” 한국기독교신학논총87, no. 1 (2013): 21-37.
Teizer, Jochen, Ben S. Allread, Clare E. Fullerton, and Jimmie Hinze. “Autonomous pro-active real-time construction worker and equipment operator proximity safety alert system.” Automation in construction19, no. 5 (2010): 630-640.
Patchell, John W., and R. Steven Hackney. “New thermal infrared sensor techniques for vehicle blind spot detection.” SAE transactions(1997): 332-337.
Pervez, Asif, and Rohit Bansal. “Capital Adequacy, Risk and Bank Performance: Evidence from India.” Journal of Xi’an University of Architecture & Technology, XI (XII) (2019): 199-212.
Yogeesh, N. “Graphical Representation of Mathematical Equations Using Open Source Software.” Journal of Advances and Scholarly Researches in Allied Education (JASRAE) 16, no. 5 (2019).
Kumar, Narendra, Anil Kumar Dahiya, and Krishna Kumar. “Image restoration using a fuzzy-based median filter and modified firefly optimization algorithm.” Int J Adv Sci Technol 29 (2020): 1471-14777.
Jelidi, Mohamed, Abdallah Ghourabi, and Karim Gasmi. “A hybrid intrusion detection system for cloud computing environments.” In 2019 International Conference on Computer and Information Sciences (ICCIS), pp. 1-6. IEEE, 2019.
Gupta, Karan, Deepak Kumar Sharma, Koyel Datta Gupta, and Anil Kumar. “A tree classifier based network intrusion detection model for Internet of Medical Things.” Computers and Electrical Engineering 102 (2022): 108158.
Kumar, Anil, Julian L. Webber, Mohd Anul Haq, Kamal Kumar Gola, Pritpal Singh, Sathishkumar Karupusamy, and Malik Bader Alazzam. “Optimal cluster head selection for energy efficient wireless sensor network using hybrid competitive swarm optimization and harmony search algorithm.” Sustainable Energy Technologies and Assessments 52 (2022): 102243.
Bansal, Rohit, and Kuldeep Chaudhary. “Impact of Customers Engagement Strategies adopted by Indian Mobile Service Providers on Customers Loyalty and Retention.” International Journal of Knowledge and Research in Management & E-Commerce 6, no. 4 (2016): 1-4.
Tay, Richard, Shakil Mohammad Rifaat, and Hoong Chor Chin. “A logistic model of the effects of roadway, environmental, vehicle, crash and driver characteristics on hit-and-run crashes.” Accident Analysis & Prevention40, no. 4 (2008): 1330-1336.
Kawyanjali, K., V. Vanitha, I. Arun Pandiyan, M. Ramachandran, and Chinnasami Sivaj. “A Review on Embedded System, Design and Simulation.” Electrical and Automation Engineering 1, no. 1 (2022): 54-60.
Chidambaram, P. K., M. Ramachandran, Vimala Saravanan, Chinnasami Sivaji, and S. Sowmiya. “A Study on Input and Response Process Parameter for Drilling Operation‖.” Design, Modelling and Fabrication of Advanced Robots 1, no. 1 (2022): 37-42.
Kshirsagar, Pravin R., Anil N. Rakhonde, and Pranav Chippalkatti. “MRI image based brain tumor detection using machine learning.” Test Engineering and Management 81 (2020): 3672-3680.
Sindhu, B., and Sruthy Anilkumar. “Perception of rural people towards digital transactions with special reference to card payment.” In AIP Conference Proceedings, vol. 2393, no. 1, p. 020171. AIP Publishing LLC, 2022.
Yogeesh, N. “Mathematical maxima program to show Corona (COVID-19) disease spread over a period.” TUMBE Group of International Journals 3, no. 1 (2020).
Yue, Lishengsa, Mohamed Abdel-Aty, Yina Wu, and Ling Wang. “Assessment of the safety benefits of vehicles’ advanced driver assistance, connectivity and low level automation systems.” Accident Analysis & Prevention117 (2018): 55-64.
Hyun, Eugin, Young-Seok Jin, and Jong-Hun Lee. “Design and development of automotive blind spot detection radar system based on ROI pre-processing scheme.” International journal of automotive technology18, no. 1 (2017): 165-177.
Shukla, H. S., Narendra Kumar, and R. P. Tripathi. “Gaussian noise filtering techniques using new median filter.” International Journal of Computer Applications 95, no. 12 (2014).
Becker, L-P., A. Debski, D. Degenhardt, M. Hillenkamp, and I. Hoffmann. “Development of a camera-based blind spot information system.” In Advanced Microsystems for Automotive Applications 2005, pp. 71-84. Springer, Berlin, Heidelberg, 2005
Chinnasami Sivaji, M. Ramachandran, and Sowmiya Soundharaj. “A Survey on Wireless Mobile Communication System and Requirements.” (2022).
Kumar, Narendra, H. Shukla, and R. Tripathi. “Image Restoration in Noisy free images using fuzzy based median filtering and adaptive Particle Swarm Optimization-Richardson-Lucy algorithm.” International Journal of Intelligent Engineering and Systems 10, no. 4 (2017): 50-59.
Krykewycz, Gregory R., Christopher Pollard, Nicholas Canzoneri, and Elizabeth He. “Web-based “crowdsourcing” approach to improve areawide “bikeability” scoring.” Transportation research record2245, no. 1 (2011): 1-7.
Jeong, Sungmoon, Sang-Woo Ban, and Minho Lee. “Autonomous detector using saliency map model and modified mean-shift tracking for a blind spot monitor in a car.” In 2008 seventh international conference on machine learning and applications, pp. 253-258. IEEE, 2008.
Kumar, Krishna, Ravindra Pratap Singh, Prashant Ranjan, and Narendra Kumar. “Daily Plant Load Analysis of a Hydropower Plant Using Machine Learning.” In Applications of Artificial Intelligence in Engineering, pp. 819-826. Springer, Singapore, 2021.
Yogeesh, N. “Graphical representation of Solutions to Initial and boundary value problems Of Second Order Linear Differential Equation Using FOOS (Free & Open Source Software)-Maxima.” International Research Journal of Management Science and Technology (IRJMST) 5, no. 7 (2014).
Kumar, Anil, Rajabov Sherzod Umurzoqovich, Nguyen Duc Duong, Pratik Kanani, Arulmani Kuppusamy, M. Praneesh, and Minh Ngyen Hieu. “An intrusion identification and prevention for cloud computing: From the perspective of deep learning.” Optik 270 (2022): 170044.
Shukla, Hari Shanker, R. P. Tripathi, and N. Kumar. “Image Restoration using modified binary particle Swarm Optimization Richardson-Lucy (MBSO-RL) algorithm.” International Journal of Applied Engineering Research 10, no. 22 (2015): 43077-43081.
Nomani, Md Zafar Mahfooz, and Rehana Parveen. “Prevention of chronic diseases in climate change scenario in India.” Environmental justice 13, no. 4 (2020): 97-100.
Sundaramurthy, Shanmugam, C. Saravanabhavan, and Pravin Kshirsagar. “Prediction and classification of rheumatoid arthritis using ensemble machine learning approaches.” In 2020 International Conference on Decision Aid Sciences and Application (DASA), pp. 17-21. IEEE, 2020.
Nishya, N., M. Ramachandran, Sivaji Chinnasami, S. Sowmiya, and Sriram Soniya. “Investigation of Various Honey comb Structure and Its Application.” Journal: Construction and Engineering Structures 1, no. 1 (2022): 1-8.
Dhiraj V. Astonkar , M. Ramachandran, Prabakaran Nanjundan, Malarvizhi Mani, “Analysis of Blind Spot in Heavy Vehicles using TOPSIS MCDM Method”, REST Journal on Advances in Mechanical Engineering, 1(2), (2022):19-27.